File:Cappuccino.jpg

From Quadshot Wiki
Jump to: navigation, search
Original file(1,024 × 576 pixels, file size: 121 KB, MIME type: image/jpeg)

Cappuccino contents from left to right: propellers, pylons, spar covers 2 and 3, spar covers 1 and 4, winglets and radio receiver bay cover, front lid, rear lid, electronics frame, Set B ESCs; reverse propellers, left wing half (underside shown), right wing half, set A ESCs; carbon spar, LED power wires (red/black), voltage sense wire, blue/white LED boards and wires (blue/black), red LED board and wires (yellow/black), green LED board and wires (green/black), LED driver board, LED signal wire (white/black); Servo accessories, servos, M2.5 screws, M3 screws, motor clips, camera mounting bolt, hook-loop strap, servo pushrods, control horns, prop savers; motors, pigtail heat shrink tube, pigtail brass tubes, battery pigtail

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:12, 21 June 2012Thumbnail for version as of 20:12, 21 June 20121,024 × 576 (121 KB)Esden (talk | contribs)QS1 Kit Assembly
  • You cannot overwrite this file.

The following 3 pages link to this file:

Metadata