Difference between revisions of "Compatible Hardware"

From Quadshot Wiki
Jump to: navigation, search
m (Telemetry Modules)
(Batteries: added connector info)
Line 2: Line 2:
  
 
== Batteries ==
 
== Batteries ==
 +
 +
Note: the Quadshot ships with an XT60 battery connector.
  
 
* [http://www.hobbyking.com/hobbyking/store/__6306__ZIPPY_Flightmax_2200mAh_3S1P_20C.html Zippy 20C 2200]
 
* [http://www.hobbyking.com/hobbyking/store/__6306__ZIPPY_Flightmax_2200mAh_3S1P_20C.html Zippy 20C 2200]

Revision as of 17:05, 14 February 2013

This is a user-compiled list of hardware found to be compatible with the Quadshot. No guarantees or endorsements are made or implied. Information may be incorrect or outdated. All trademarks are the properties of their respective owners.

Batteries

Note: the Quadshot ships with an XT60 battery connector.

Propellers

  • 8" diameter x 4.5" pitch propellers with 5mm- or 7mm-diameter center hole:
    • Gaui 8A and 8B
    • Draganfly Innovations 8x4.5

Propeller Savers and O-Rings

Hobbyking 3mm Prop Saver Note the metal collet fits prop center holes of 5.5mm, 7.0mm, and 9.5mm diameter; Quadshot props are 5mm and would require reaming.

Tower Hobbies

Horizon Hobbies

Radio Control Transmitters

Telemetry Modules

Note regulations covering telemetry module frequency and power vary greatly by country. See http://www.digi.com/xbee/ for more info.


  • Digi XBee 1mW 802.15.4 module with wire whip, chip, or external antenna, Digi part numbers of the form XB24-A_I-001, where _ defines the antenna type (see here).
  • Digi XBee Pro S1 63 mW (USA) module with wire whip, chip, or external antenna, Digi part numbers of the form XBP24-A_I-001