Do you have the Quadshot transmitter or do you have a Spektrum brand transmitter? If you bought a kit with the stock transmitter it should have come programmed to work with that transmitter only. If you switched out the stock receiver for a Spektrum receiver you will need to switch the baud rate.

Are the wires from the Lia to the receiver plugged in to the bind port on the receiver, or CH 1-6? It will only work in the bind port.

I have also seen a wire that was out of order; black white red, or something other than black red white.

I will just send you one. Can I use the same shipping address as per your last order?

No problem.

Through experience there is something different about the black wire. Make sure to tin it before soldering, even though it already appears to be tinned.