|xbee on cgs
|Page 1 of 1|
|Author:||david.erzen [ Fri May 02, 2014 12:34 pm ]|
|Post subject:||xbee on cgs|
i recently reinstall the gcs as per instructions on the QS wiki.
the xbee communication doesn't work anymore. (before the reinstallation everything worked well)
if i choose Flight USB-serial@57600 in Sessions, the green led on xbee starts to blink but there is no connection established to QS.
the terminal messages are as follows:
Run '/home/quad/paparazzi-tri/sw/ground_segment/tmtc/link -d /dev/ttyUSB0 -s 57600'
Failure("WARNING: live md5 signature for 162 does not match current configuration, please reload your code (disable check with -no_md5_check option)")
|Author:||david.erzen [ Fri May 02, 2014 5:46 pm ]|
|Post subject:||Re: xbee on cgs|
Got the solution.
lisa needs to be uploaded again after new installation.
|Page 1 of 1||All times are UTC|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group