|Page 1 of 1|
|Author:||jbartley [ Sun Nov 11, 2012 6:31 pm ]|
|Post subject:||noisy motor|
After about the 8th flight one of my motors started making a funny noise, almost like the prop was slipping on the shaft. I checked and tightened all the screws and run the quadshot on the bench to test it and it was still making the noise. While trying to figure out where the noise was coming from the motor started smoking so I shut everything off. I moved a motor from another location to the location of the motor that smoked to see if the problem was with the motor or something else. There did not seem to be a problem with anything else and the motor from another location run fine. So I have ordered another motor and I am wondering if I should be worried that the motor controller in that location my have been damaged, Thanks for any help.
|Page 1 of 1||All times are UTC|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group