forum.thequadshot.com
http://thequadshot.com/forum/

Need a new Quadshot Mocha Prop Saver band...
http://thequadshot.com/forum/viewtopic.php?f=4&t=1092
Page 1 of 1

Author:  james [ Sat Feb 16, 2013 7:07 pm ]
Post subject:  Need a new Quadshot Mocha Prop Saver band...

Where can I get one?

Author:  webman [ Mon Feb 18, 2013 9:45 am ]
Post subject:  Re: Need a new Quadshot Mocha Prop Saver band...

Hi James,

I live in Germany. I just bought a bunch of "O-Ringe NBR 70" (gaskets) from an German online store.

They are 18mm inner diameter and are 3mm thick. As they are a little bit wider than the original QS parts (they are about 17mm inner diameter) they do fit excellent and the flexibility is equal to the original ones.

I remember, that one of the QS-team once was using hair ties (http://forum.thequadshot.com/viewtopic.php?f=4&t=247&p=1499&hilit=hair#p1499) ;)

Regards, webman

Author:  Chris [ Tue Jun 10, 2014 8:11 pm ]
Post subject:  Re: Need a new Quadshot Mocha Prop Saver band...

It's best to remove them when not flying. They last barely a week when in tension all day long. I take them off if we are not flying for an hour or more. Also we flew for a while with rubber bands. I would not use a band that is smaller than 1/8 x 1/16, and they last for less time than the o rings so removing them and regular inspection is a must.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/