forum.thequadshot.com
http://thequadshot.com/forum/

sodering leds on the Mocha
http://thequadshot.com/forum/viewtopic.php?f=3&t=41655
Page 1 of 1

Author:  jkg [ Mon Jan 06, 2014 8:54 pm ]
Post subject:  Re: sodering leds on the Mocha

Hi, Mocha Quadshots come with the Lia autopilot board don't use the white connectors - the wires will just get soldered directly into the Lia. (you can check out the picture at: http://wiki.thequadshot.com/wiki/Assembly_Manual#Lia to see where the other ends of those wires will eventually go).

For the longer (~7 1/2 inch) red and black wire, you can check local hardware or hobby shops for any 26 or even 28-guage stranded hookup wire. For example:

Radioshack:
red 26 guage: http://www.radioshack.com/product/index ... +-+%245.99
black 26 guage: http://www.radioshack.com/product/index ... +-+%245.99

Also, any small scrap wire, like from a dead servo, servo pigtail, or even power lead from a wall wart should work -- it just needs to be small enough to fit through the holes in the LED board.

//Jeff

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/