Reply to topic  [ 1 post ] 
sodering leds on the Mocha 
Author Message

Joined: Tue Jun 21, 2011 7:33 pm
Posts: 37
Location: Santa Cruz, CA
Post Re: sodering leds on the Mocha
Hi, Mocha Quadshots come with the Lia autopilot board don't use the white connectors - the wires will just get soldered directly into the Lia. (you can check out the picture at: http://wiki.thequadshot.com/wiki/Assembly_Manual#Lia to see where the other ends of those wires will eventually go).

For the longer (~7 1/2 inch) red and black wire, you can check local hardware or hobby shops for any 26 or even 28-guage stranded hookup wire. For example:

Radioshack:
red 26 guage: http://www.radioshack.com/product/index ... +-+%245.99
black 26 guage: http://www.radioshack.com/product/index ... +-+%245.99

Also, any small scrap wire, like from a dead servo, servo pigtail, or even power lead from a wall wart should work -- it just needs to be small enough to fit through the holes in the LED board.

//Jeff

_________________
Mechanical Engineer @ Transition Robotics, Inc.
PM or email me at [jkg atsign transition hyphen robotics dot com] if you'd like to help edit the Quadshot wiki!


Mon Jan 06, 2014 8:54 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software for PTF.